Method of preventing leakage of vertical DC socket
Release time：2018-07-17 Clicks： Click
The vertical DC outlet factory how to prevent the leakage of DC power supply is a lot of people to ask questions, this problem is not very difficult to solve, so we are here to give you a detailed introduction.
When we use the DC power socket, there will be frequent leakage. How can we prevent the leakage of DC power socket?
1, DC power socket should be placed in the child can not touch the mold.
2, using transparent soft plastic socket protection potential to prevent children from touch hole.
3. When lightning strikes, plug out electrical appliances to prevent lightning from damaging electrical appliances or hurting people.
4. Vertical DC outlet manufacturers say that children should not be taught to insert anything (such as sticks, wires, keys, etc.) into socket holes.
5, do not use wet hands to plug electrical plugs, do not use wet cloth to wipe the power plug and socket.
6, the outlet of the water dispenser should not be placed directly on the floor, so as to avoid leakage of water to the earth's sockets and leakage.
7, vertical DC socket manufacturers think, pull out DC power outlet, must be adults personally do it, do not let children do, in order to avoid pulling out half of the finger contact with the metal part of the plug and electric shock. At the same time, pull the plug to pull out the plug, not pull and pull the plug's power cord.
Compared with the linear power supply, although the design of the socket power is more complex, some performance indicators are still less than the linear power supply, and the noise is larger, but the main advantages of the socket power supply are reflected in the power efficiency, volume and weight. The vertical DC socket manufacturer introduces, especially when the power supply is made up of high power, its volume is much smaller than that of the linear power supply under the same output power, and the cost is also significantly reduced.