威尼斯144777com-56711状元红开奖记录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Why is toggle switch called power switch?

Release time:2018-09-19    Clicks: Click

 
The toggle switch is also called the power switch. Why do I say so? Let's introduce to you in detail below.
威尼斯144777com
The switching switch is also called the power switch. The sliding switch is also a kind of power switch. It appeared in Japan earlier and was widely used in the world electronics industry.
The dial switch is a new generation of optoelectronic switchgear manufactured with integrated circuit skills and SMT surface equipment skills. It has the functions of delay, broadening, external synchronization, anti-interference, high reliability, working area stability and self-diagnosis. This novel photoelectric switch is an active photoelectric detection system type electronic switch with pulse modulation. The cold light sources used are infrared light, red light, green light and blue light, etc. It can be non-touch, non-invasive, sensitive and manipulate various solid, liquid, transparent body, black body, soft body and smoke and other substances. Situation and action. The touch-type travel switch of the driving waterproof and explosion-proof switch has the defects of low reference speed, poor precision, simple damage to the detected object and short service life, while the effect interval of the transistor proximity switch is short, so the non-metallic material can not be directly detected. However, the new photoelectric switch overcomes the above shortcomings, and has the advantages of small size, multiple functions, long life, high precision, fast response speed, long detection interval and strong anti-optical, electrical and magnetic interference ability.
Push switch series, photoelectric switch can be used in various applications to avoid strong light source, photoelectric switch in the environment of high illumination, usually can work safely. But we should avoid the strong light source of the sensor's optical axis, such as sunlight and incandescent lamp. When the optical axis of the sensor (receiver) and the viewpoint of the strong light source can not be changed, a light shielding plate or a light shielding cylinder can be installed near the top of the sensor. To avoid mutual interference, MGK series of new photoelectric switches are usually active to avoid mutual interference, so do not worry about mutual interference. However, HGK series antireflection infrared photoelectric switches should avoid adjacent groups and mutual interference when several groups are close to the equipment side by side. A more useful way to avoid this interference is to insert the projector and receiver settings and to open the group spacing across two groups. Of course, it is also a good way to use different frequencies.
The switching power supply is a kind of power supply which uses modern power electronics skills to control the ratio of registration and turn-off time of the switch tube and insists on stable output voltage. The switching power supply is usually composed of pulse width modulation (PWM control IC and MOSFET). Compared with linear power supply and switching power supply, the interest of both are added with the addition of output power, but the addition rate of the two is different. The cost of linear power supply is higher than that of switching power supply at a certain output power point, which is called the cost turning point. With the opening and innovation of power electronics skills, the switching power supply skills are also innovative from time to time, this interest turning point is increasingly moving to the low-output power terminal, which provides a broad open space for switching power supply.
Toggle switch concept
The switching power supply is a kind of power supply which uses modern power electronics skills to control the ratio of registration and turn-off time of the switch tube and insists on stable output voltage. The switching power supply is usually composed of pulse width modulation (PWM control IC and MOSFET). Compared with linear power supply and switching power supply, the interest of both are added with the addition of output power, but the addition rate of the two is different. The cost of linear power supply is higher than that of switching power supply at a certain output power point, which is called the cost turning point. With the opening and innovation of power electronics skills, the switching power supply skills are also innovative from time to time, this interest turning point is increasingly moving to the low-output power terminal, which provides a broad open space for switching power supply.
  报错
Product display
Click here to send me a message

威尼斯144777com|56711状元红开奖记录

XML 地图 | Sitemap 地图