威尼斯144777com-56711状元红开奖记录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Main points of attention to purchase touch switch

Release time:2018-11-02    Clicks: Click

 
We should pay attention to some problems when purchasing light switch. Some serious problems need our attention. The details are shown below.
威尼斯144777com
Touch the switch I don't know if you really know, in fact, many things in our life have been applied to it. Touch switch is a kind of switch which is widely used, especially in consumer products. It is widely used in computers, audio, headphones, mobile phones, Bluetooth devices, listening machines, telephones, toys, lamps, fax machines, printers, medical equipment, smart watches, smart wearing devices. Equipped with laser pen, mouse, keyboard, electromagnetic oven, TV, DVD, bread machine, electric oven, household appliances and other electronic products. The market usage rate of light touch switch is so wide that the major consumer manufacturers can not afford to lose. If the quality abnormalities often occur in the case of rush shipment, then it is undoubtedly a great trouble for manufacturers, and the economic losses are incalculable. A good product. They are all one in a hundred miles, carefully selected; next, I will talk about the problems and solutions that will occur when the switch is touched lightly.
First, the problem of hand feeling.
Many customers are responding, and the samples sent by suppliers are clearly in line with the feel, but by mass production, the feel will become bad. In fact, this problem is very common, we should know that the touch of the switch and the key force are controlled by shrapnel. Among them, the shrapnel is divided into phosphorus-copper shrapnel and stainless steel shrapnel, but now many manufacturers choose phosphorus-copper shrapnel in order to save costs. The performance and price of phosphorus-copper shrapnel are relatively low. After the furnace temperature, phosphorus-copper shrapnel will change and shrink seriously, which will lead to poor hand feeling. If stainless steel shrapnel is used, there will be no problem. Because the cost of stainless steel shrapnel is much higher than that of phosphorus-copper shrapnel, many manufacturers take risks to choose phosphorus-copper shrapnel, so when purchasing lightly touch switch, they must ask questions clearly.
Two, the lid off
In the production process, there will be a customer response switch lid will leak phenomenon. How does a good switch cover come off? First of all, we need to understand the structure of the switch, the switch cover is on the back cover, this is the constant production process. Familiars will find that the lid is fixed by four riveting points above the base, so long as the four riveting points are loose or the riveting points shrink or deform after high temperature, the lid will fall off. Preventive cover only pay attention to the following two problems just for the sake of, one base to use heat-resistant materials, two riveting points to rivet well fixed, do the above two problems, this problem was perfectly solved.
Three, light press no conduction.
Many consumers, when using the product, often find that the button press does not react, it is very hard to press, the product has functional response. Because our switches are exposed to air use, many finished products are not sealed, consumer electronics products are required to heat. In wet weather, the switch shrapnel is easy to be oxidized, the contact performance after oxidation is not as good as before, that is, there is a problem of light press not conducting. Many consumers also removed the switch and found a small black spot on the shrapnel, which is the effect of shrapnel oxidation. Therefore, it is suggested that the electronic products we do not normally use should be placed in a relatively dry place, and the prepaid electronic parts should be oxidized.
Four, high resistance value.
At present, many customers are not very familiar with the problem of switch resistance. Generally, our switch resistance is controlled below 30m Euro, so the contact performance and life of the switch are very good, but some switches after furnace temperature and life test resistance value is high. What is the effect of high resistance on the switch? If the resistance is high, it means that the contact area between the shrapnel and PIN foot of the switch is too small. The contact area is too small to cause the switch to be contacted. Once the switch is not contacted, it will be bad. Therefore, we should be careful to deal with the switch resistance problem, shrapnel and PIN feet for plating requirements are relatively high, plating resistance value will be low. Switch after life testing, the shrapnel surface will be worn, if the electroplating thin, high resistance, the switch is not good.
Five, do not eat tin, false welding phenomenon, foot rust.
Many customers in the production process, found that the PIN foot of the switch does not eat tin, often false welding phenomenon. The PIN foot of the switch is made of iron foot and copper foot. The switch is assembled by electroplating after high-speed punching. The switch is sealed and packed by PE plastic bag. We all know that this is not a very good packaging method. The good packaging method is vacuum packaging. The switch foot is easy to contact with air. If the air contacts for a long time, the switch foot will be oxygen. Chemicals, more serious foot will also rust, this situation occurs on iron feet, we recommend the use of copper feet silver-plated foot. Once the foot is oxidized, there will be no tin and false welding. There is also a possibility problem, if the foot of PCB is too large, it is easy to have switch fake welding problem. It is suggested that suppliers and customers should pay attention to this problem.
Product display
Click here to send me a message

威尼斯144777com|56711状元红开奖记录

XML 地图 | Sitemap 地图