威尼斯144777com-56711状元红开奖记录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Dismantling Method for Problems of Mouse Micro-switch

Release time:2019-01-11    Clicks: Click

 
How to disassemble, repair and replace the mouse micro switch? Let's give you a detailed introduction.
威尼斯144777com
1. Prepare a tool to pry the mouse micro-switch first. You can use the front end of the fine wire to flatten it for later use, try to grind it thinner, or use a thin blade or bamboo toothpick as a tool to pry the micro-switch.
2. The side of the mouse microswitch is next to other components. It is not easy to remove it. Usually, one side of the mouse microswitch is non-component occlusion, so it is necessary to pry it from this side first.
3. Before disassembly, observe carefully. There are two clips on the micro-switch, and the micro-switch is firmly stuck. You must use a toothpick to press the clip of the micro switch inside and then pick it up gently from the bottom gap of the micro switch.
4. When taking the cap of the micro-switch, do not exert excessive force. One side of the cap should fall off. Then the cap can be removed by inserting a micro switch from the detached side with a straight paper clip and lightly touching the clip on the opposite side.
Product display
Click here to send me a message

威尼斯144777com|56711状元红开奖记录

XML 地图 | Sitemap 地图