威尼斯144777com-56711状元红开奖记录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Selection of lightly touched switches has great tricks

Release time:2019-05-09    Clicks: Click

 
We have a good way to select the light switch. What's the specific trick? Let's give you a detailed introduction.
威尼斯144777com
Selection of Light-touch Switches
The first factor affecting the quality of touch switch is mainly decided by the protection, solderability, conduction reliability, life, handle, production process and installation size of touch switch.
Firstly, the pin base material is the pin base material, and the pin base material of the light touch switch is brass or phosphorus copper (low grade is iron). In order to reduce the contact resistance, the pin is basically silver plated. The SO2 gas in the silver meets the air will oxidize, which directly affects the solderability and contact resistance of the switch. Therefore, the high quality light touch switch should be controlled in the silver plating thickness of the pin base material and the silver plating process. The order of silver plating on the market is as follows:
Silver plating thickness: 0.3um or more (silver), 0.2um (thin silver), 0.1um (white)
Second silver plating process: nickel pre-plating and silver re-plating on the substrate, copper pre-plating and silver re-plating on the substrate, and direct silver plating on the substrate
Whether the protective agent treatment is carried out after silver plating on the substrate or whether the switch has the function of dust-proof and waterproof is very important, otherwise, even the best silver plating treatment, the switch will be oxidized.
Secondly, the key factor affecting the reliability of conduction is the structure of contact point. Because the function of touch switch is contact point and shrapnel conduction, the larger the contact surface is, the better the contact surface is. The contact surface is determined by the structure. There are probably three types of structures in the market. The order of advantages and disadvantages is as follows:
Bubble (crater type) "O contact", grooved type "2 contact" and flat bubble type "1 contact"
Thirdly, life and feel are determined by the stroke of the light touch switch and the cooperation of the shrapnel. The shorter the stroke, the lighter the sound, the longer the life, on the contrary, in the case of fixed shrapnel technology, the life of the light touch switch is mainly determined by the stroke or sound.
In addition, the key factor to determine the life of shrapnel is stamping technology. The stamping technology in Japan and Taiwan is very popular in China. Therefore, in the case of technological upgrading, whether the requirements for imported materials are reduced or not, such as 160gf shrapnel life, there are four main types in the market.
Fourth is the production process. The assembly process will ultimately affect the quality of the products after the accessory is available. The assembly process depends on the management ability of the production company, the quality meaning of the employees and the quality assurance ability. The final product quality will be different with different assurance abilities. The market assembly methods are man-made and machine. The cost of machine assembly is low, but the quality of the products is low, and the cost of manual assembly is low. High quality but also high quality.
Fifth, factory inspection, the methods and items of factory inspection also affect the quality of the final light touch switch, such as appearance, feel, conduction, resistance and other items are spot inspection or full inspection, such as the rejection rate required by some large factories is measured by PPM or zero defect, it is necessary to set up spot inspection or quality inspection after the factory inspection.
Product display
Click here to send me a message

威尼斯144777com|56711状元红开奖记录

XML 地图 | Sitemap 地图