威尼斯144777com-56711状元红开奖记录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Whats the name of the toggle switch

Release time:2020-01-02    Clicks: Click

 
What's the name of the toggle switch? What's the other name? Let's introduce the details below.
威尼斯144777com
The toggle switch is also called the change-over switch, which is also called the power switch. The slide switch is also a kind of power switch. It first appeared in Japan and was widely used in the electronic industry in the world.
Toggle switch concept
Toggle switching power supply is a kind of power supply which uses modern power electronic technology to control the time ratio of switch registration and switch off, and insists on stable output voltage. Switching power supply is generally composed of pulse width modulation (PWM control IC and MOSFET). Compared with the linear power supply, the interest of the switching power supply and the linear power supply increases with the increase of the output power.
The cost of linear power supply is higher than that of switching power supply at a certain output power point, which is called cost reversal point. With the opening and innovation of power electronic technology, the switching power technology is also changing from time to time. This interest reversal point is increasingly moving to the low output power end, which provides a wide open space for switching power supply.
The toggle switch is a new generation of photoelectric switch equipment made by using integrated circuit technology and SMT surface equipment technology. It has intelligent functions such as delay, broadening, external synchronization, anti disturbance, high reliability, safe working area and self diagnosis. This novel photoelectric switch is a kind of active photoelectric detection system type electronic switch with pulse modulation. The cold light sources used include infrared light, red light, green light and blue light, etc. it can be non touched and can activate and control all kinds of solid, liquid, transparent body, black body, soft software and smoke without damage.
The touch type travel switch of waterproof and explosion-proof switch has the disadvantages of low reference speed, poor accuracy, simple touch detection, short detection object and short life, while the action interval of transistor proximity switch is short, so it can not directly detect non-metallic data. However, the new photoelectric switch overcomes the above shortcomings, and has small size, multiple functions, long service life, high precision, fast illumination speed, long detection interval and strong anti light, electric and magnetic disturbance ability.
Toggle switch series, photoelectric switch can be used in various applications, to prevent strong light source, photoelectric switch in high ambient illumination, generally can work safely. However, it should be avoided that the optical axis of the sensor is facing the sun light, incandescent lamp and other strong light sources. When the optical axis of the sensor (light receiver) and the viewpoint of the strong light source cannot be changed, a light shielding plate or a long light shielding cylinder can be installed near the top of the sensor.
To prevent each other from disturbing, MGK series new photoelectric switches generally have the function of actively preventing each other from disturbing, so there is no need to worry about each other. However, when several groups of HGK series infrared photoelectric switches are close to the equipment side by side, the adjacent groups and each other shall be prevented from disturbing. The most useful way to prevent this kind of disturbance is to set the projector and the light receiver alternately. When crossing two groups, the group distance is also opened. Of course, it is also a good way to use different frequency models.
Toggle switching power supply is a kind of power supply which uses modern power electronic technology to control the time ratio of switch registration and switch off, and insists on stable output voltage. Switching power supply is generally composed of pulse width modulation (PWM control IC and MOSFET). Compared with the linear power supply, the interest of the switching power supply and the linear power supply increases with the increase of the output power. The cost of linear power supply is higher than that of switching power supply at a certain output power point, which is called cost reversal point.
With the opening and innovation of power electronic technology, the switching power technology is also changing from time to time. This interest reversal point is increasingly moving to the low output power end, which provides a wide open space for switching power supply.
Product display
Click here to send me a message

威尼斯144777com|56711状元红开奖记录

XML 地图 | Sitemap 地图